D-Link DPH-850S User Manual page 55

button to call the contact;
3. Tap the "Video" or "Audio" button to dial.
 Use the call logs
1. Press the "Phone" icon in the launcher.
2. Tap the "Call logs" tab, select the number you want to call, when the
content is larger than one screen, use a finger sliding up and down the screen
to view.
3. Tap the audio call button or video call button on the right, and
select a line to dial (SIP1, SIP2, SIP3, and SIP4).
You can also use the Redial key. In the dialer view or the standby, press the
Redial key will dial the call logs number in the last breath.
 Use the contacts
Touch the Contacts icon in the launcher, or enter the dialer view, tap
the "Contacts" tab, select a contact you want to call, a context menu will be
shown, select the "Call contact" and select a line to dial.
 User the Line key
You can select the Line key on the key board of the phone to call directly.
1. Choose one Line key, like Line2. (Note: Line2 has registered)
2. Enter the dial interface, input the phone number or click the Memory Key
to choose which you want to dial.
3. Select Audio or Video to call.
Answer the ringing
1. When you receive a call from the contact occurs when talking views
displays the caller's local picture, name, phone number and location as shown
in Figure:
2. When you receive an incoming call that is not from a stored contact, the
call will appear on the screen of default contact picture, phone numbers and
the location (need to be opened in the Call settings), the name will be
displayed as Unknown.
54