Pppoe - D-Link DPH-850S User Manual

3.2.2 PPPoE

Tap "Network" ----> "PPPoE". After configuring the parameters, you can click
"Save" button to save successfully.
Configuration
PPPoE
PPPoE interface
Meaning
User name: Input the assigned PPPoE Username.
Password: Input the assigned PPPoE Password.
Auto connect on power up: Whether to
automatically connect PPPoE on boot.
Auto reconnect When connect failed whether to
automatically connect PPPoE.
Enable PPPoE: Whether to enable PPPoE.
After the parameter configuration is completed, if
you do not select "enable PPPoE", then you can
click on the "save" button, it only saves the
configuration parameters; but if you select "enable
PPPoE" and click "save" button, it can
immediately use the PPPoE mode to connect the
network, at the same time it will pop up PPPoE
connection box, clicking the "disconnected" will
pop up PPPoE configuration frame; if you click
"connect" ,it will reconnect PPPoE; if you click
"Cancel" button, it will only save the
configuration parameters which have been set, not to
enable PPPoE connection.
24