Using Optional Equipment - Sony SHAKE-X7D Operating Instructions Manual

Play Timer/Recording
Timer
Make sure you have set the clock
(page 18).
Play Timer:
You can set the system to turn on and
play a disc, USB device, or radio station
automatically at the preset time.
Recording Timer:
You can transfer music from a preset
radio station to a USB device at a
specified time.
1
For Play Timer:
Prepare the sound source, then
press  +/– to adjust the volume.
To start from a specific track or file,
create your own program (page 24).
For Recording Timer:
Tune to the preset radio station
(page 34).
2
Hold down SHIFT, then press
TIMER MENU.
3
Press
"PLAY SET" or "REC SET", then
press
4
Set the time to start playback or
transfer.
Press
hour/minute, then press
5
Use the same procedure as in step
4 to set the time to stop playback
or transfer.
6
Press
the sound source you want, then
press
For Recording Timer:
Connect a transferable USB device
to the
44 GB
/ repeatedly to select
.
/ repeatedly to set the
/ repeatedly to select
.
(USB) 2 port.
7
Press  to turn off the system.
To check the timer setting or
activate the timer again
1
Hold down SHIFT, then press TIMER
MENU.
"TIMER SEL" flashes in the display
panel.
2
Press
3
Press
"PLAY SEL" or "REC SEL", then press
.
To cancel the timer
Repeat the same procedure as above
and select "TIMER OFF" in step 3, then
press
Notes

The system turns on before the preset
time. If the system is turned on at the
preset time or if "STANDBY" flashes in
the display panel, the Play Timer and the
Recording Timer will not play or transfer.

Do not operate the system from the time
the system turns on until the playback or
transfer starts.
Using optional
equipment
1
Press  – repeatedly until
.
"VOLUME MIN" appears in the
display panel.
2
Connect an optional equipment
(page 15).
3
Press FUNCTION +/– repeatedly to
select the function which
corresponds to the connected
equipment.
4
Start playing the connected
equipment.
.
/ repeatedly to select
.