Using Optional Equipment; Deactivating The Touch Panel On The Unit (Child Lock); Setting The Automatic Standby Function - Sony MHC-V90DW Operating Instructions Manual

Hide thumbs Also See for MHC-V90DW:
Table of Contents

Advertisement

Using optional
equipment
1
Press  – repeatedly until "VOL
MIN" appears on the display.
2
Connect an optional equipment
(page 21).
3
Press FUNCTION +/– repeatedly
to select "AUDIO IN".
4
Start playing the connected
equipment.
5
Press  + repeatedly to adjust
the volume.
Note
The system may enter standby mode
automatically if the volume level of the
connected equipment is too low. Adjust
the volume level of the equipment.
To turn off automatic standby function,
see "Setting the automatic standby
function" (page 67).
Deactivating the touch
panel on the unit (Child
Lock)
You can deactivate the keys (except
) on the touch panel of the unit to
prevent misoperation, such as child
mischief.
Touch and hold  on the unit for
more than 5 seconds.
"CHILD LOCK ON" appears on the
display.
You can only operate the system using
the buttons on the remote control.
To turn off the Child Lock function,
touch and hold  on the unit for more
than 5 seconds until "CHILD LOCK OFF"
appears on the display.
Note
• •
Child Lock function will be turned off
automatically when you disconnect the
AC power cord (mains lead).
Child Lock function cannot be activated
• •
when you open the disc tray.
Setting the automatic
standby function
The system enters standby mode
automatically in about 15 minutes
when there is no operation or audio
signal output.
By default, the automatic standby
function is turned on.
1
Press OPTIONS.
2
Press / repeatedly to select
"AutoSTBY", then press
3
Press / repeatedly to select
"ON" or "OFF", then press
To exit the options menu, press
OPTIONS.
Note
For the models sold in Europe,
• •
to comply with the power saving
regulation in Europe, products with
the serial number S015503001 or later
cannot use this function when the
product is connected to the wired
network or not connected to the
wireless network. This function will
not be available when the network
connection is disconnected as well.
When the multi-room function turns on,
• •
it supports TDLS (Tunneled Direct Link
Setup) and works as a wireless router
that improves the data communication
quality.
.
.
67
GB

Advertisement

Table of Contents
loading

Table of Contents