Sony SHAKE-X7D Operating Instructions Manual page 35

2
Press BLUETOOTH on the unit to
select BLUETOOTH function.
"BLUETOOTH" appears in the
display panel.
Note
If the system is connected to a
BLUETOOTH device, press BLUETOOTH
on the unit to disconnect the
BLUETOOTH device.
3
Hold down PAIRING on the unit for
2 seconds or more.
"PAIRING" flashes in the display
panel.
4
Perform the pairing procedure on
the BLUETOOTH device.
For details, refer to the operating
instructions of your BLUETOOTH
device.
5
Select the system's name (for
example, "SHAKE-X7D") on the
device's display.
Perform this step within 5 minutes,
otherwise pairing will be canceled.
In this case, repeat from step 1.
Note
If passkey is required on the
BLUETOOTH device, enter "0000".
"Passkey" may be called "Passcode",
"PIN code", "PIN number", or
"Password".
6
Perform the BLUETOOTH
connection on the BLUETOOTH
device.
The BLUETOOTH device name
appears in the display panel.
Depending on the BLUETOOTH
device, connection may start
automatically after pairing is
completed.
You can check the BLUETOOTH
device address by pressing DISPLAY
repeatedly.
Notes

You can pair up to 9 BLUETOOTH
devices. If the 10th BLUETOOTH device is
paired, the oldest paired device will be
deleted.

If you want to pair with another
BLUETOOTH device, repeat steps 1 to 6.
To cancel pairing operation
Hold down PAIRING on the unit for 2
seconds or more until "BLUETOOTH"
appears in the display panel.
Playing music from a
BLUETOOTH device
You can operate a BLUETOOTH device
by connecting the system and the
BLUETOOTH device using AVRCP.
Once the system and BLUETOOTH
device is connected, you can control
playback by pressing , , ,
/ and /.
Check the following before playing
music:
 The BLUETOOTH function of the
BLUETOOTH device is turned on.
 The pairing has been completed
(page 34).
1
Press BLUETOOTH on the unit to
select BLUETOOTH function.
"BLUETOOTH" appears in the
display panel.
2
Establish connection with the
BLUETOOTH device.
Press BLUETOOTH on the unit to
connect to the last connected
BLUETOOTH device.
Perform the BLUETOOTH
connection from the BLUETOOTH
device if the device is not
connected.
Once the connection is established,
the BLUETOOTH device name
appears in the display panel.
35 GB