Positioning The Speakers; Performing "Quick" Setup - Sony SHAKE-X7D Operating Instructions Manual

Notes

Do not mix an old battery with a new
one or mix different types of batteries.

If you do not use the remote control for
a long period of time, remove the
batteries to avoid damage from battery
leakage and corrosion.
Positioning the
speakers
To obtain optimum performance from
the system, we recommend you to
place the speakers as shown below.
 Unit
 Speaker (left)
 Speaker (right)
 TV
0.3 m
Performing "QUICK"
setup
Before using the system, you can make
the minimum basic adjustments in
"QUICK" setup.
1
Turn on your TV and select the
video input.
2
Press  to turn on the system.
3
Press FUNCTION +/– repeatedly to
select "DVD/CD", "USB 1", or
"USB 2".
The guide message [Press ENTER to
run QUICK SETUP.] appears at the
bottom of the TV screen.
4
Press without inserting a disc
or connecting a USB device.
[LANGUAGE SETUP] appears on the
TV screen. Displayed items may vary
depending on country or region.
5
Press / repeatedly to select a
language, then press
[VIDEO SETUP] appears on the TV
screen.
6
Press / repeatedly to select
the setting that matches your TV
type, then press
After [QUICK SETUP is complete.]
appears on the TV screen, the
system is ready for playback.
To change the setting manually
See "Using the Setup Menu" (page 27).
To quit "QUICK" setup
Press SETUP.
Note
The guide message appears when you
turn on the system for the first time or
after performing "RESET" (page 51).
.
.
17 GB