Sony SHAKE-X7D Operating Instructions Manual page 50


Make sure you connect the unit to
the video input jack of your TV
(page 16).

Make sure you turn on the TV and
operate the TV correctly.

Make sure you select the video input
on the TV so that you can view the
pictures from the system.

(Except for Latin American,
European, and Russian models)
Make sure you set the color system
correctly, according to your TV's color
system.
Picture noise appears.
 Wipe the disc clean (page 53).

If video signal from your system has
to go through your VCR to your TV,
the copy-protection applied to some
DVD VIDEO programs could affect
the picture quality.

(Except for Latin American,
European, and Russian models)
When you play back a VIDEO CD
recorded in a different color system
from the one you set to the system,
the picture image may be distorted
(page 18, 28).
 (Except for Latin American,
European, and Russian models)
Set the color system to match your
TV (page 18, 28).
The aspect ratio of the TV screen
cannot be changed.

The aspect ratio is fixed on your DVD
VIDEO and video file.
 Depending on the TV, you may not
change the aspect ratio.
The language for the sound track
cannot be changed.

Multilingual tracks are not recorded
on the DVD VIDEO being played back.
 The DVD VIDEO prohibits changing
the language for the sound track.
50 GB
The subtitles language cannot be
changed.

Multilingual subtitles are not
recorded on the DVD VIDEO being
played back.

The DVD VIDEO prohibits changing
the subtitles.
The subtitles cannot be turned off.

The DVD VIDEO prohibits turning off
subtitles.
The angles cannot be changed.

Multi-angles are not recorded on the
DVD VIDEO being played back.

The DVD VIDEO prohibits changing
the angles.
Tuner
There is severe hum or noise, or
stations cannot be received.
("TUNED" or "STEREO" flashes in the
display panel.)

Connect the antenna properly.

Change antenna location and its
orientation to obtain good reception.

Consult your nearest Sony dealer if
the supplied AM antenna has come
off from the plastic stand.

Turn off surrounding electrical
equipment.
BLUETOOTH device
Pairing cannot be performed.

Move the BLUETOOTH device closer
to the system.

Pairing may not be possible if other
BLUETOOTH devices are present
around the system. In this case, turn
off the other BLUETOOTH devices.
 Make sure the correct passkey was
entered at the BLUETOOTH device.
The BLUETOOTH device cannot
detect the unit, or "BT OFF" appears
in the display panel.
 Set the BLUETOOTH signal to "BT ON"
(page 38).