Setting The Bluetooth Audio Codecs; Setting The Bluetooth Standby Mode - Sony SHAKE-X7D Operating Instructions Manual

 If your NFC-compatible smartphone is
having an older OS version than
Android 4.1.x, download and start the
"NFC Easy Connect" application. "NFC
Easy Connect" is a free application for
Android smartphone that can be
obtained from Google Play. (The
application may not be available in
some countries/regions.)
1
Touch the smartphone to the
N-Mark on the unit until the
smartphone vibrates.
Complete the connection by
following the instructions displayed
on the smartphone.
When the BLUETOOTH connection
is established, the BLUETOOTH
device name appears in the display
panel.
2
Start playback of an audio source
on the smartphone.
For details, refer to the operating
instructions of your BLUETOOTH
device.
Tip
If pairing and the BLUETOOTH connection
fail, do the following.
 Remove the case from the smartphone
if using a commercially available
smartphone case.
 Touch the smartphone to the N-Mark on
the unit again.
 Relaunch "NFC Easy Connect"
application.
To disconnect the smartphone
Touch the smartphone to the N-Mark
on the unit again.
Setting the BLUETOOTH
audio codecs
You can receive data in AAC or SBC
codec format from a BLUETOOTH
device.
1
Press OPTIONS.
2
Press / repeatedly to select
"BT AAC", then press
3
Press / repeatedly to select
the setting.

BT AAC ON: Enable reception in
AAC codec format.

BT AAC OFF: Receive in SBC codec
format.
To exit the options menu, press
OPTIONS.
Notes

You can enjoy high quality sound if the
AAC is selected. In case you cannot
listen to AAC sound from your device or
the sound is interrupted, select "BT AAC
OFF".

If you change this setting when the
system is connected to a BLUETOOTH
device, the BLUETOOTH device will be
disconnected. To connect to the
BLUETOOTH device, perform the
BLUETOOTH connection again.
Setting the BLUETOOTH
standby mode
The BLUETOOTH standby mode
enables the system to turn on
automatically when you establish the
BLUETOOTH connection from a
BLUETOOTH device.
1
Press OPTIONS.
2
Press / repeatedly to select
"BT STBY", then press
.
.
37 GB