Other Operations; Using The Party Chain Function - Sony SHAKE-X7D Operating Instructions Manual

Other Operations

Using the Party Chain
function
You can connect multiple audio
systems in a chain to create a more
interesting party environment and to
produce higher sound output.
Activate a system in the chain to be the
"Party Host" and share the music.
Other systems will become "Party
Guest" and play the same music as the
"Party Host".
Setting up the Party Chain
Set up a Party Chain by connecting all
the systems using audio cords (not
supplied).
Before connecting cords, be sure to
disconnect the AC power cord (mains
lead).
 If all the systems are equipped
with Party Chain function
First system
Second
system
Continue the connection
until the last system
Last system
 The last system must be connected
to the first system.
 Any system can become a Party Host.

You can select a new Party Host
when Party Chain function is
activated. For details, see "To select a
new Party Host" (page 42).
 If one of the system is not
equipped with Party Chain
function
First system
Second
system
Continue the connection
until the last system
Last system

The last system is not connected to
the first system.

Connect the system which is not
equipped with Party Chain function
at the last system. Be sure to select
the audio in function on the last
system.

You must select the first system as
Party Host so that all systems are
playing the same music when Party
Chain function is activated.
Enjoying the Party Chain
Use the buttons on the unit to perform
this operation.
1
Plug in the AC power cord (mains
lead) and turn on all the systems.
41 GB