Sony SHAKE-X7D Operating Instructions Manual page 47

The remote control does not
function.
 Remove the obstacles between the
remote control and the unit.

Move the remote control closer to
the unit.

Point the remote control at the unit's
sensor.

Replace the batteries (R03/size AAA).
 Move the unit away from the
fluorescent light.
There is acoustic feedback.
 Reduce the volume.

Move the microphone away from the
speakers or change the direction of
the microphone.
The color irregularity on a TV screen
persists.

Turn off the TV at once, then turn it
on after 15 to 30 minutes. If the color
irregularity still persists, place the
speakers farther away from the TV.
"PLEASE CONNECT ALL SPK" appears.

Check that all speakers are
connected.
"CHILD LOCK" appears when you
press any button on the unit.

Set the Child Lock function to off
(page 45).
Speakers
Sound comes from only one channel
or the left and right volume is
unbalanced.

Place the speakers as symmetrically
as possible.

Check that the speakers are
connected securely and correctly.

The source being played back is
monaural.
There is no sound from a specific
speaker.
 Check that the speaker is connected
securely and correctly.
Disc player
The disc tray does not open and
"LOCKED" appears in the display
panel.
 Consult your nearest Sony dealer or
local authorized Sony service facility.
The disc tray does not close.
 Load the disc correctly.
The disc does not eject.
 You cannot eject the disc during
CD-USB Synchronized Transfer or
REC1 Transfer. Press  to cancel the
transfer, then press  on the unit to
eject the disc.
 Consult your nearest Sony dealer.
Playback does not start.
 Wipe the disc clean (page 53).

Reload the disc.
 Load a disc that this system can play
back (page 8).

Remove the disc and wipe away the
moisture on the disc, then leave the
system turned on for a few hours
until the moisture evaporates.

The region code on the DVD VIDEO
does not match the system.
The sound skips.

Wipe the disc clean (page 53).
 Reload the disc.

Move the unit to a place with no
vibration.

Move the speakers away from the
unit. When you listen to a track with
bass sounds at high volume, the
speaker vibration may cause the
sound to skip.
Playback does not start from the first
track.

Set the play mode to Normal Play
(page 23).

Resume Play has been selected.
Press  twice. Then, press  to start
playback.
47 GB