Setting The Bluetooth Audio Codecs - Sony MHC-V77DW Operating Instructions Manual

Hide thumbs Also See for MHC-V77DW:
Table of Contents

Advertisement

2
Start playback of an audio
source on the smartphone.
For details, refer to the operating
instructions of your BLUETOOTH
device.
Hint
If pairing and the BLUETOOTH connection
fail, do the following.
— Remove the case from the smartphone
if using a commercially available
smartphone case.
— Touch the smartphone to the N-Mark
on the unit again.
— Relaunch the "NFC Easy Connect"
application.
To terminate the BLUETOOTH
connection
Touch the smartphone to the
N-Mark on the unit again.
Setting the BLUETOOTH
audio codecs
You can enable AAC, LDAC or SBC
codec from BLUETOOTH device.
AAC/LDAC can be selected only
when the BLUETOOTH device
supports AAC/LDAC.
1
Press OPTIONS.
2
Press / repeatedly to select
"BT CODEC", then press
3
Press / repeatedly to select
the setting, then press
"AUTO": Enable reception in AAC
• •
or LDAC codec format depending
on the BLUETOOTH device's
capabilities.
"SBC": Receive in SBC codec
• •
format.
To exit the options menu, press
OPTIONS.
44
GB
Note
You can enjoy high quality sound if AAC
• •
or LDAC is selected. If you cannot listen
to AAC or LDAC sound from your device
or the sound is interrupted, select "SBC".
If you change this setting while the
• •
system is connected to a BLUETOOTH
device, the BLUETOOTH device will
be disconnected. To connect to the
BLUETOOTH device, perform the
BLUETOOTH connection again.
Hint
LDAC is an audio coding technology
developed by Sony that enables the
transmission of High-Resolution (Hi-Res)
Audio content, even over a BLUETOOTH
connection. Unlike other BLUETOOTH
compatible coding technologies
such as SBC, it operates without any
down-conversion of the Hi-Res Audio
content*
three times more data*
other technologies to be transmitted
over a BLUETOOTH wireless network
with unprecedented sound quality, by
means of efficient coding and optimized
packetization.
*
1
Excluding DSD format contents.
2
*
In comparison with SBC (Subband
Coding) when the bitrate of 990 kbps
(96/48 kHz) or 909 kbps (88.2/44.1 kHz)
is selected.
.
.
1
, and allows approximately
2
than those

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mhc-gt7dw

Table of Contents