Dexcom G4 Platinum User Manual page 96

8
Removal
arrow
Sensor pod
tab wings
Sensor pod
tabs
4. Insert the jagged edges so that they "hug" the wide end of the transmitter
in the sensor pod. Press the safety lock down until you cannot press down
anymore, and the transmitter will "pop" out of the sensor pod.
5. Remove the transmitter, clean it (see Chapter 10, Section 10.1, Maintenance)
and store it in a cool, dry place until your next glucose monitoring session.
Method 2
If you did not save the safety lock, you can simply use your fingers to spread out
the tabs at the back of the sensor pod (end closest to the sensor pod tab wings).
The transmitter will "pop" out of the sensor pod.
96 | Dexcom G4 PLATINUM Continuous Glucose Monitoring System
Safety lock
(from applicator)
Sensor pod with
safety lock
snapped in