Viewing The Last Fix Trip Summary Screen; Last Fix Buffer; Viewing A Last Fix; Last Fixes - Magellan eXplorist XL User Manual

The receiver immediately begins navigating toward the selected
coordinates. The display returns to the last viewed NAV screen and the
words TO COORD appear in the title bar.
The COORD position and COORD route information will be lost
when the receiver is turned off.

Last Fix Buffer

While you are taking position fixes your receiver can automatically save
them. The receiver will store position fixes in the last fix buffer at a rate
you defined in SETUP under LAST FIX INTERVAL.

Viewing a LAST FIX

MENU
Press MENU and use the UP/DOWN
ARROWs to highlight LAST FIXES (on
the second page of the Function Menu)
and press ENTER. The LAST FIX screen
that appears exactly duplicates the
screen you have already seen when
viewing a waypoint.
Notice that the receiver has assigned a name that begins with a plus (+)
and is followed by a two-digit number. This number will increase as the
Last Fixes are being taken with the higher the number, the older the fix.
The receiver will store a total of 16 Last Fixes.
Use the LEFT/RIGHT ARROWs to scroll through the other last fixes
in the buffer.

Viewing the LAST FIX Trip Summary Screen

This screen informs you that the summary you are about to view will
cover the trip you made from the time the selected last fix was recorded
to your present position (POS) or a different last fix.
MENU
Press ENTER
ARROW keys to select
Highlight

LAST FIXES

Press ENTER
Highlight
LAST FIXES
ARROW keys to select
any last fix except +LFX01
Use LEFT/RIGHT
"TO" last fix or POS
Use LEFT/RIGHT
ARROW keys to select
last fix
Use LEFT/RIGHT
ENTER
41