Viewing A User-Created Poi On The Map Screen - Magellan eXplorist Basic User Manual

40
pals that you have saved can be viewed on the Map screen to assist you in locating the POI.
1. Press
MENU.
2. Use the Arrow joystick to highlight
Pts of Interest.
3. Press
ENTER.
4. Use the Arrow joystick up/down to highlight
My Pts of Interest.
5. Use the Arrow joystick left/right to select
Nearest
or
Alphabetical.
6. Press
ENTER.
7. Locate the fi Ie where the PO I has been saved and press
ENTER.
(The eXplorist wi II
automatically open the default file.)
8. Highlight the POI and press
ENTER.
9. Use the Arrow joystick to high light
View
on
Map.
10. Press
ENTER.
11. The Map screen will be displayed in the Cursor mode. The cursor will be directly
over the POI you have selected. You may use the Zoom buttons to change the scale
of the map displayed; and if your position icon is within range, it will be shown.
12. Press ESC to return to the Iist of PO Is found instep 7.
Note: Remember that pressing the
NAV
button will return you to the last viewed Map
screen. In step 12 if you are finished with the pals in the POI database, you could
press
NAV
to close the POI database and return to the last viewed Map screen.