Magellan eXplorist XL User Manual page 41

Access the ROUTE MENU. Use the UP/
DOWN ARROWs to select an EMPTY
route and press ENTER.
If there are no EMPTY routes in the ROUTE MENU, you must
clear a route before you can create a new one.
Use the LEFT/RIGHT ARROWs to
select the FROM waypoint and press
ENTER. This is the starting position for
this leg of your route. The default
waypoint in the FROM field is the
current position, labeled as STRT1. The
"1" indicates that it is the START
waypoint of Route 1.
The highlight moves down to the TO
line. Use the LEFT/RIGHT ARROWs to
change the TO waypoint to be the
destination for this leg. Note that the
screen displays the bearing and distance
for this leg of the route. Press ENTER
to confirm the TO waypoint.
The receiver automatically used the TO
waypoint from the previous leg as the
FROM waypoint for the next leg.
Continue to add legs to this route by using the LEFT/RIGHT ARROWs
changing the TO waypoint and ENTER to confirm. The bearing and
distance are updated as you scroll through the various TO waypoints.
When you have created as many legs of the route as desired, simply
press ENTER with the TO highlight blank.
33