Deleting A Leg; Delete - Magellan eXplorist XL User Manual

Access the ROUTE MENU and highlight the route to insert a leg into.
Press ENTER to bring up the pop-up menu, highlight EDIT, and press
ENTER. Use the UP/DOWN ARROWs to view the route leg in which
you want to insert a waypoint, press ENTER to access the EDIT LEG
menu, select INSERT, and press ENTER.
A highlight bar appears for you to select
the new TO waypoint for this leg,
thereby creating a new waypoint and
"pushing" the other waypoints in the
route forward to make room.
Use the LEFT/RIGHT ARROWs to scroll
through the waypoint list to the
waypoint you wish to use as the
destination for this new intermediate
leg and press ENTER.
The new leg has now been added. The FROM waypoint did not change
but the TO waypoint is now the one you just entered. The receiver
has updated the bearing and distance for this leg and displays it on
the screen.
Press the DOWN ARROW. The following leg has also been changed.
The following leg now starts from the waypoint you designated as
the TO waypoint for the previous leg.
The new TO waypoint must be different from the old (must have
a distance greater than 0.1 distance units from the "FROM"
waypoint); the receiver will not insert a leg in this case but will
return to the leg screen you were viewing.

Deleting a Leg

Another feature of editing a route is the ability to delete one of the
legs.
Access the
ROUTE
MENU
Access the ROUTE MENU and highlight the route to be edited. Press
ENTER, highlight EDIT, and press ENTER. Use the UP/DOWN
ARROWs to view the route leg to be deleted, press ENTER to access
the EDIT LEG menu, select DELETE, and press ENTER.
36
Use ARROW KEYS
to highlight route to
be edited
Highlight
ENTER

DELETE

Press ENTER
Highlight
ENTER
EDIT
Press ENTER
ENTER
Use UP/DOWN
ARROWs to select
route leg