Items In The Extended Menu - Sony PDW-HD1500 Operation Manual

Items in the extended menu

The following tables show the items in the extended menu.
• Item names are the names which appear on an external
monitor to which the output of the COMPOSITE
OUTPUT 2 (SUPER) connector, the SDSDI OUTPUT 2
(SUPER) connector, or the HDSDI OUTPUT 2
(SUPER) connector is input.
• An abbreviated name appears in the time data display
area when you press the NEXT button.
Item number Item name
101 SELECTION FOR SEARCH DIAL
ENABLE
102 MAXIMUM SPEED
105 REFERENCE SYSTEM ALARM
107 REC INHIBIT LAMP FLASHING
108 AUTO EE SELECT
109 FORCED EE WHEN DISC UNLOAD During disc loading/unloading and when no disc is inserted, select
114 AUDIO MONITOR OUTPUT LEVEL
128
Setup Menu
Menu items in the 100s, relating to the control panels
Settings
Select how the unit enters the shuttle, jog, or variable speed mode.
dial (dial direct): Press the SHTL/JOG or VAR/JOG button or, except
during recording/editing, turn the jog dial or shuttle dial.
key (via search key): Press the SHTL/JOG or VAR/JOG button.
Specify the search speed in F.FWD/F.REV mode (forward and reverse
high-speed search) and shuttle mode.
35/20: F.FWD/F.REV mode: ±35 times normal speed, Shuttle mode: ±20
times normal speed
MX/20: F.FWD/F.REV mode: Maximum speed, Shuttle mode: ±20 times
normal speed
MAX: F.FWD/F.REV mode: Maximum speed, Shuttle mode: maximum
speed
Note
Maximum speed is about ±50 times normal speed. However, the
maximum speed may vary depending on the state of the clip and the
playback position on the disc.
Select whether to display a warning when the reference video signal is
not being supplied, or when it differs from this unit's system frequency.
off: No warning.
on: Flash the STOP button as a warning.
Select whether to flash the REC INHI indicator when recording is
prevented (see "REC INHI (recording inhibit) indicator" (page 20).
off: Light the REC INHI indicator.
on: Flash the REC INHI indicator.
When a disc is inserted and PB/EE on the HOME page of the function
menu is set to "EE", select the operation modes in which input video and
audio signals are automatically handled in E-E mode.
S/F/R (stop/f.fwd/f.rev): In stop/fast-forward/fast-reverse modes
stop: In stop mode
whether to control the output signal PB/EE setting.
on: Do not control (the signal is always an E-E signal).
off: Control.
Select whether to control the level of the audio signal output from the
AUDIO MONITOR R, L connectors with the LEVEL knob for the
PHONES jack.
var (variable): Control.
fixed: Do not control.
• The values in the Settings columns are the values which
appear in the time data display area. (The values may
appear in a different format on an external monitor. In
this case, the external monitor values are shown in
parentheses.) Underlined values are the factory defaults.