Item number Item name
953
UP CONVERTER PROCESS (UC)
954
DETAIL GAIN (UC)
955
LIMITER (UC)
956
CRISP THRESHOLD (UC)
957
LEVEL DEPEND THRESHOLD (UC)
a)
958
H DETAIL FREQUENCY (UC)
959
H/V RATIO (UC)
142
Setup Menu
Menu items in the 900s, relating to digital process
Settings
Select the source picture to use in converting SD to HD.
a)
FIELD: Use field pictures.
ADAPTIVE: Frame or field is selected automatically.
a)
Adjust the up-converter image enhancer, the sharpness of edge
enhancement.
0 to 40H to 7FH
a)
Adjust the up-converter image enhancer, the maximum detail level added
to emphasize the original signal.
0 to 20H to 3FH
Adjust the up-converter image enhancer, the threshold amplitude at
a)
which low amplitude signals are not emphasized.
0 to 8 to FH
Adjust the up-converter image enhancer. Set the luminance range for
edge enhancement.
0 to 8 to FH
a)
Adjust the up converter image enhancer. Set the center frequency and
frequency properties for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz: 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
a)
Adjust the up-converter image enhancer. Set the horizontal/vertical ratio
for edge enhancement.
0 to 3 to 7