Sony PDW-HD1500 Operation Manual page 150

On-screen indication
Character string at the
right of a menu item
An * (asterisk) in a
complete list of settings
To change a menu item setting
Carry out the following operations to change the setting.
For information about how to change network settings see
next section "To change network settings".
Function buttons
ACCESS
CH-1 CH-3
ALL CH
CH-2 CH-4
CHAPTER
EXPAND
VARIABLE KEY INHI
PAGE
NET REC
ON
PRE-
LOCAL
SET
OFF
REMOTE HOME
PB
PHONES LEVEL PREV
DISPLAY
SHIFT
TOP
SHIFT button
PAGE/HOME button
1
Use the PUSH SET(S.SEL) knob or the V/MARK1
and v/MARK2 buttons to select the required item,
then press the PUSH SET(S.SEL) knob or the
SELECT function button (F2).
The sub-items of the selected item appears.
2
Select a sub-item with the same operation as step 1,
and use the PUSH SET(S.SEL) knob or the V/MARK1
and v/MARK2 buttons to change the setting.
3
Press the PUSH SET(S.SEL) knob or the SELECT
function button (F2) to confirm the setting change.
4
Press the SAVE function button (F5).
The message "NOW SAVING..." appears on the video
monitor display, and "Saving..." appears in the time
data display area, while the new settings are saved in
memory. When the saving operation is completed, the
video monitor display and the time data display area
return to their normal indications.
150
Maintenance Menu
Meaning
Current setting of the menu item
When shown with a colon (:): the
current setting is the same as
the factory default setting.
When shown with a raised dot
(.): the current setting is
different from the factory
default setting.
Factory default setting
Arrow buttons
PUSH SET(S.SEL) knob
EJECT
MARK1
PUSH SET(S.SEL)
IN OUT
MENU
MARK2
SHTL/JOG
VAR/JOG
RESET
RETURN
PLAY NEXT STOP REC
THUMBNAIL
SUB CLIP
DISC MENU
F REV F FWD END STANDBY REC INHI
MENU button
To cancel changing a setting
Before pressing the SAVE function button (F5), press the
MENU button.
The menu disappears from the video monitor display,
without saving the new setting.
To change network settings
To change network settings, carry out the procedure
described in the previous section, "To display the
maintenance menu", to display the NETWORK menu
item, then carry out the following operations.
For details of the settings, consult your network
administrator.
When the IP address is assigned automatically
Note
Check that the network cable is connected to this unit
before carrying out the operation.
Follow the procedure as shown in previous section "To
change a menu item setting" to set maintenance menu item
M5: NETWORK >M50: DHCP to "ENABLE".
To check the assigned IP address
Select maintenance menu item M5: NETWORK
>M51: IP ADDRESS PRESET.
Note
If the IP address cannot be assigned, this is shown as
"000.000.000.000." In this case, consult the network
administrator.
To set the IP address
First set DHCP to "DISABLE" (see the previous section,
"When the IP address is assigned automatically").
1
Select maintenance menu item M5: NETWORK
>M51: IP ADDRESS PRESET.
2
Press the PUSH SET(S.SEL) knob.
The IP address appears, and the digit that can be
changed flashes.
3
Set the IP address.
To select a different digit to be changed
Use the B/IN and b/OUT buttons.
To change the value of a digit
Turn the PUSH SET(S.SEL) knob.
Turning clockwise increases the value, and turning
counterclockwise decreases the value.
The V/MARK1 and v/MARK2 buttons can be used.