Sony PDW-HD1500 Operation Manual page 123

Item number Item name
013 SYSTEM FREQUENCY
SELECT MENU
016 ALARM DISPLAY
017 SUB STATUS DISPLAY SELECT Determine the kind of sub status information to be output from the
024 MENU CHARACTER TYPE
028 HD CHARACTER
Settings
Specify whether to enable switching the system frequencies (59.94i, 59.94P,
29.97P, 50i, 50P, 25P, 23.98P).
off: Do not enable switching the system frequencies.
on: Enable switching the system frequencies.
For details about switching the system frequencies, see page 39.
Note
Settings for both basic and extended menu items are saved separately for
different system frequencies.
• 1080 59.94i/29.97P
• 1080 50i/25P
• 1080 23.98P
• 720 59.94P
• 720 50P
Therefore, when you switch system frequencies, all menu items are reset to
the current settings for the new mode. (They are different from the setting for
the previous mode.)
Select whether to display alarm messages.
off: Do not display alarm messages. (However, certain important alarms are
displayed.)
limit (on (limited)): Display only a minimum number of alarm messages.
on: Display all alarm messages.
For details about alarm message display conditions, see "Alarms"
(page 158).
COMPOSITE OUTPUT 2 (SUPER) connector, the SDSDI OUTPUT 2
(SUPER) connector, or the HDSDI OUTPUT 2 (SUPER) connector.
off: Do not output sub status information.
rmain (disc remain): Available disc space (unit: minute)
clip (clip no): Order of playback of the selected clip/total number of clips
pbr (playback remain): The remaining playback time of the selected clip
from the current playback position (hours:minutes:seconds:frames).
name (clip name/title): The name of the clip that is currently being recorded
or played, as set in Settings >Display Title of the Disc Menu (standard
name, user-defined name, title, or planning metadata name)
The following characters can be displayed as clip names in this area.
• Digits: 0 to 9
• Alphabetic characters: a to z, A to Z
• The following symbols: !, ", #, $, %, &, ', (, ), *, +, , (comma), -, .
(period), /, : (colon), ; (semicolon), <, =, >, ?, @, [, ], ^, _, {, |, }, ~
• Space
edit (edit preset): Edit preset state
ed&tc (edit preset & tc mode): Edit preset state and settings of timecode
Note
When menu item 005 is set to "off", sub status information is not displayed
when this item is set to anything other than "off".
Determine the type of characters in menu text output from the COMPOSITE
OUTPUT 2 (SUPER) connector, the SDSDI OUTPUT 2 (SUPER) connector,
or the HDSDI OUTPUT 2 (SUPER) connector for superimposed display on
the monitor.
white: White letters on a black background.
black: Black letters on a white background.
W/out: White letters with black outline.
B/out: Black letters with white outline.
Set this item by selecting the required type while viewing the monitor.
Specify whether to superimpose text information on the video signal output
from the HDSDI OUTPUT 2 (SUPER) connector.
off: Do not superimpose.
f-key: Follow the function menu setting.
a)
Setup Menu
a)
123