Sony PDW-HD1500 Operation Manual page 129

Item number Item name
118 KEY INHIBIT SWITCH EFFECTIVE
AREA
Sub-item
1 FUNCTION-KEY
2 CONTROL PANEL
119 VARIABLE SPEED LIMIT IN KEY
121 FRAME PB MODE
130 DISPLAY DIMMER CONTROL
131 AUDIO VOLUME
140 AREA MARKER
142 REPEAT MODE
143 INDEX PICTURE POSITION
145 MODE KEY ENABLE DURING
RECORDING
Menu items in the 100s, relating to the control panels
Settings
Select which buttons can be operated when the KEY INHI switch is set to
"ON". The following sub-items control different sets of buttons
independently.
Select whether function buttons on the front panel are enabled.
dis (disable): Disabled.
ena (enable): Enabled.
Select operable buttons on the front panel are enabled.
dis (disable): Disabled.
ena (enable): Enabled.
Select the playback speed range when carrying out playback in variable
speed mode from the front panel of this unit.
off (off (–2 to +2)): –2 to +2 times normal speed.
on (on ( 0 to +1)): 0 to +1 times normal speed.
Select the variable playback field/frame mode.
auto: Field playback
frame: Frame playback. Compared to field playback, frame playback
gives more detail during playback of still pictures.
Set the brightness of the indication on the LCD.
10%, 25%, 50%, 75%, 100%
Select whether each of the CH-1/ALL CH, CH-2 to CH-4 adjustment
knobs on the control panel is effective to control the audio recording level
and playback level on each channel or the CH-1/ALL CH adjustment
knob alone functions as a master control to control the audio level on all
channels together.
each: Each of the CH-1/ALL CH, CH-2 to CH-4 adjustment knobs is
effective to control each channel.
all: The CH-1/ALL CH adjustment knob alone functions as a master
control.
When "all" is selected, the ALL CH indicator under the CH-1/ALL CH
adjustment knob lights up.
Select whether to display the display area of SD output on the color LCD.
off: Do not display.
on: Display.
Put the unit into repeat playback mode, or exit from repeat playback
mode.
off: Exits from repeat playback mode.
play & VAR fwd: Perform repeat playback during normal playback and 0
to +1 times normal speed variable playback in the forward direction.
To select repeat playback in this mode from a device connected to
the REMOTE(9P) connector, send the "REPEAT PLAY" command or
the "REPEAT VAR FWD" command.
force: Perform repeat playback during normal playback and 0 to +1 times
normal speed variable playback in the forward direction. To select
repeat playback in this mode from a device connected to the
REMOTE(9P) connector, send the "PLAY" command or the "VAR
FWD" command.
Note
Set to "off" to perform linear editing.
Select the frame of the clip to use as the thumbnail image (index picture)
when recording.
0sec to 10sec: Can be set in the range from 0 seconds (first frame of the
clip) to10 seconds, in units of 1 second.
Select whether the STOP button is the only button that stops recording.
ena (all enable): Recording stops when the EJECT button
button, STOP button, SHTL/JOG button, and VAR/JOG button
pressed.
stop: Recording stops only when the STOP button is pressed.
a)
, PLAY
b)
are
129
Setup Menu