Sony PDW-HD1500 Operation Manual page 137

Item number Item name
713
VIDEO SETUP REFERENCE
Sub-item
OUTPUT
LEVEL
715 VIDEO GAIN CONTROL
716 CHROMA GAIN CONTROL
717 CHROMA PHASE CONTROL
718 SETUP LEVEL (59.94i/59.94P/
29.97P/23.98P mode)/BLACK
LEVEL (50i/50P/25P mode)
719 SYSTEM PHASE SYNC
720 SYSTEM PHASE SC
723
INPUT VIDEO BLANK
Sub-Item
1 ALL LINE
2...10 LINE 12
...
LINE 20
2...15 LINE 9
...
LINE 22
726 H BLANKING WIDTH
728 OUTPUT SCH PHASE
Menu items in the 700s, relating to video control
Settings
Set the video setup amount to be added to the composite output signal (in
b)
59.94i/59.94P/29.97P mode only).
In 59.94i/59.94P/ Add the setup level selected by this item to the output signal.
29.97P mode (UC) 0.0%, 7.5%
In 59.94i/59.94P/ Add the setup level selected by this item to the output signal.
29.97P mode (J) 0.0%, 7.5%
Adjust the video output level.
–2048 to 0 to 848
Adjust the chroma output level.
–2048 to 0 to 848
Adjust the chroma phase.
–128 to 0 to 127
Adjust the setup level (black level).
–272 to 0 to 272
b)
Adjust the output signal sync phase.
–128 to 0 to 127
Adjust the output signal subcarrier phase.
0 to 511
a) Switch blanking on or off for lines in the vertical blanking interval of input
video signals. Lines can be specified individually. Y/C signals and odd/
even fields are blanked simultaneously.
Blanking in recorded signals is carried out according to these settings.
- - -: Specify the blanking for each line separately.
blnk (blank): Regardless of the settings of other sub-items, blank all lines
which can be specified in this menu item.
thru (throu): Regardless of the settings of other sub-items, switch
blanking off for all lines which can be specified in this menu item.
In 59.94i/59.94P/ Specify blanking for lines 12 to 20.
29.97P mode blnk (blank): Switch blanking on.
thru (throu): Switch blanking off.
In 50i/50P/25P Specify blanking for lines 9, 322 to 22, and 335.
mode blnk (blank): Switch blanking on.
thru (throu): Switch blanking off.
Select the horizontal blanking width of the output analog video signal.
narow (narrow): Digital blanking (narrow)
wide: Analog blanking (wide)
When "wide" is selected, the horizontal blanking width complies with
SMPTE170M, and normally the blanking is widened and the image
becomes narrower. It is recommended to select "narow" at the editing
stage, then later, for broadcast transmission to select "wide", to output a
signal conforming to the standard. Note, however, that "narow" has to be
always selected for SDI signals.
Set the subcarrier H phase.
–512 (–512 (DEC)) to 0 (0 (DEC)) to 511 (511 (DEC))
137
Setup Menu