Ip Camera Connection To The Server; Surveillance Software Gui; Login Window - Foscam FI9804P User Manual

If you cannot play the video in the VLC player, please check the port mapping. You can read Quick Installation
Guide about How to configure port forwarding.
NOTE:
If you modify the camera's username or password, you had better reboot the camera, or else the
new username and password cannot take effect when you enter the authentication in the VLC.

2.4 IP camera connection to the server

Device supports ONVIF 2.2.1 protocol,You can easily access the NVR with ONVIF or server with ONVIF.

3 Surveillance Software GUI

Please refer to the Quick Installation Guide if you install the camera at first time. After finishing quick installation, you can take
time to learn the operation of the software.

3.1 Login Window

Please check the login window above, it was divided to 4 sections from no. 1 to 4.
Section1 Enter the Username and password
The default administrator username is admin with no password, please reset the password at first using and
prevent unauthorized users login the camera .
Section2 Stream
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
Figure 3.1
www .foscam. us
www .foscam. us
14