ER USING THE FAN STORAGE HEATER
The control at the right side of the heater regulates the heat input. The input control has five settings,
numbered "1" to "5". During mild weather, it is normal to set the input control in a medium position. In
cooler weather, the control should be set at 5 to give maximum heat retention.
For models without remote control, the discharge of the storage heater requires an ambient
thermostat to control the operation of the fan. Maximum comfort is obtained when an ambient digital
timer thermostat is used, which as well as regulating temperature can bi programmed to operate at
the desired time.
MAINTENANCE OF YOUR FAN STORAGE HEATER
This storage heater does not require any special care. During the first few charges you may be aware
of an unusual odour. This is normal, and if it happens, please ventilate the room until the odour
disappears. If dust accumulates on the heater surface, it can be removed using a wet cloth when the
heater is cold. Do not use solvents or abrasive products.
WIRING DIAGRAM