Lenovo ThinkPad X200 Hardware Maintenance Manual page 120

Table 28. Removal steps of inverter card or LED board (continued)
Step Screw (quantity)
1
M2 × 3.5 mm, wafer-head, nylon-coated (1)
When installing:
Make sure that the connector
Cabling:
When replacing the inverter card or the LED board, route the connector cable as in this figure.
114
Hardware Maintenance Manual
Downloaded from LpManual.com Manuals
1
2
3
2 4
and are attached firmly.
4
Color
Silver
Torque
0.181 Nm
(1.85 kgf-cm)