Lenovo ThinkPad X200 Hardware Maintenance Manual page 111

Table 24. Removal steps of system board, DC-in connector, fan, and ExpressCard slot assembly for ThinkPad X200,
X201, and X201i (continued)
When installing:
• Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on the
part marked
problem due to imperfect contact with a component. You need to peel the thin film off from the rubber
For ThinkPad X200:
For ThinkPad X201 and X201i:
• Make sure that the fan connector is attached firmly.
Note: The ExpressCard slot assembly is attached to the system board.
Downloaded from LpManual.com Manuals
a
as in the following figure. Either too much or too less application of grease can cause a thermal
b
b
a
a
1
Chapter 8
b
.
Removing and replacing a FRU
.
105