Lenovo ThinkPad X200 Hardware Maintenance Manual page 103

Table of Contents

Advertisement

Table 22. Removal steps of base cover assembly for ThinkPad X200, X201, and X201i (continued)
5
6
In step
and
, remove the system board, the DC-in connector, and the fan assembly together from the base
cover assembly.
When installing:
a
Check the position of the wireless switch
, and firmly fit the system board into the base cover assembly.
Note: Following step is only for ThinkPad X201 and X201i.
Cable routing:
Route the speaker cable as shown in this figure.
.
97
Chapter 8
Removing and replacing a FRU
Downloaded from LpManual.com Manuals

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents