Change Layout Command - Black Box iCompel ICOMP-ICC User Manual

3. Understanding Media Types
You can also use the Advance To mechanism to initiate player actions as a result of user interactions, such as motion sensor,
pressure mat, or touch screen events (see
To add a rendezvous point to a playlist, follow these steps:
1. Click the Specials tab.
2. In the Rendezvous Point field, enter a name. You can enter any text for the name (but not starting with the string auto_)
and names are not case-sensitive.
3. Click the button.
4. Make sure the rendezvous point appears immediately before the item you want the player to synchronize with the other
playlist.
5. If required, repeat to create additional rendezvous points in other playlists.
6. Add the Advance To command.
To add an Advance To command to a playlist, follow these steps:
1. Click the Specials tab.
2. From the Advance To Rendezvous Point drop-down list, select the relevant rendezvous point name.
3. Click the button.
4. Make sure the Advance To command appears immediately before the item you want the player to synchronize with the
other playlist.
5. If you want the Advance To command to target only a specific zone:
a. Click the button.
b. Select the zone from the drop-down list.
c. Click the
Note: If you want to change the Advance To command to point to a different rendezvous point or to different zones, click
the button and alter your selection.

3.5.2 Change Layout Command

Unlike the Advance To command, the Change Layout command launches a different screen layout with its own arrangement
of zones.
If you want to implement a simple change of the layout, then the Advance To command brings a quick result. However, it is
difficult to implement a complex change using the Advance To command. The Change Layout command displays a different
layout entirely, but it does take longer to refresh the screen.
To add a Change Layout command to a playlist, follow these steps:
1. Click the Specials tab.
2. From the Change Layout drop-down list, select the new layout you want to use.
3. Click the button.
4. Make sure the Change Layout command appears in the right place in the playlist.
76
Using Interactivity
button.
for more details).