Software Update - Black Box iCompel ICOMP-ICC User Manual

9. Setup
pop-up screen.
5. If this is an external backup to a USB device, when you have completed the backup process, remove the USB device.
To restore a backup:
1. On the menu bar, click Setup and select Maintenance & Troubleshooting > Backup & Restore.
2. If it is held externally, attach the USB device containing the backup to the iCC and click the External Backup tab.
Alternatively, click the
the button.
3. Click the button next to the backup you want to restore.
4. Wait for the iCC to reboot after the restore process finishes.
5. If the backup was from a USB device, remove the USB stick.

9.5 Software Update

You can access the Software Updates page from the Setup > Maintenance Troubleshooting menu.
Use the Software Update options to check the latest update status and to configure whether the iCC performs updates
automatically or not. Please contact Black Box Technical Support at +1 (724) 746-5500 or info@blackbox.com for more
information on available updates.
Note: It is not possible to install an earlier software version than the one currently installed. The currently installed version
is shown highlighted.
Click the tab for the option you require:
Update Status – Checking details of the last update, how the iCC checks for updates, and if any new updates are
l
available.
Settings – Configuring or disabling automatic updating.
l
Manual Update – Performing a manual update from a downloaded file.
l
Caution: Never turn off the power to the iCC while it is installing an update. It can take 30 minutes to install a large update.
Update Status:
The display contains the following information:
Last Update Messages
Status
Last Checked for updates Indicates when the iCC last checked for updates.
148
button, navigate to its location on your computer, and click the
Describes the most recent update.
Indicates whether or not the iCC is allowed to check for updates.
If it reads 'Not allowed to Check for updates' this is because you have selected one of the following
options on the Settings tab:
Turn off automatic update.
l
Download Allowed – specifying a period that does not include the current time.
l
If you have either selected Turn off automatic update or have set a Download Allowed period that
does not include the current time, this reads 'Not known'.
button then