Security - Advanced Ldap Settings - Black Box iCompel ICOMP-ICC User Manual

9. Setup
LDAP Tests:
Run the LDAP test to check your current LDAP settings and to receive feedback on any problems.
Recommendation: Always test any change to the LDAP settings before rebooting the iCC.
To run a test:
1. Enter the name of the target iCC user in the Test Username field.
2. Click the
The test results are displayed in two parts:
A table showing the status of each step.
l
A detailed log.
l
When you have a correct setup, and the iCC username is valid, the LDAP test returns the Passed status. To correct any
indicated problems, check the user permissions and change the associated LDAP settings.
The iCC performs the following tests and indicates any failures as well as displaying detailed log messages:
Tests
Bind to LDAP server
Search for FTP user
FTP Read/Write Access
Search for HTTP user
Find HTTP user
Search for group membership
Ad hoc Permissions
SSL Certificates:
If you want to use customized SSL certificates, rather than the default certificates, follow these steps:
1. Select the Use Custom SSL certificates for the Web Server option.
2. Enter your Certificate, Key, and CA Chain values in the relevant fields.
3. Click the
9.2.7 Security – Advanced LDAP Settings
The iCC Security page includes tabs to allow you to configure and test LDAP:
LDAP – Detailing access control using the Lightweight Directory Access Protocol.
l
LDAP Expert – Entering XML-based LDAP parameters. (Only displayed if you have set the User Interface Policy to
l
Expert.)
LDAP Tests – Testing your LDAP configuration.
l
140
button.
Checks
Configuration and Bind sections
FTP User section
FTP User section User Filter
HTTP User section
HTTP User section
HTTP Permissions section
Ad hoc Users section
button and reboot the iCC.