Tv & Radio - Black Box iCompel ICOMP-ICC User Manual

Ethernet:
To configure IP addressing, complete the following information then click the
Ethernet Settings Select how the iCC obtains its IP address:
DHCP – Select if the iCC will obtain its IP address from a DHCP server on your network. If the iCC cannot
l
find a DHCP server, it defaults to an IP address of 169.254.1.1.
Static – Select if you are specifying an IP address for the iCC. Enter it in the IP Address field. If you select
l
this option, the iCC enables the Static Address Settings and Static DNS Settings fields.
Caution: If you are using a static address in combination with an LDAP security configuration, you
must specify a valid DNS Nameserver. Failure to do so will make your iCC inaccessible.
DHCP Setting Optional. For ease of reference, enter a name for the iCC. Only available if your DHCP server supports this
feature.
Static Address If you selected the Static Ethernet setting, enter the addresses required:
Settings
IP Address – Enter the IP address for the iCC.
l
Netmask – Specify the address range for the iCC subnet.
l
Default Gateway – Enter the gateway IP address if the iCC uses one.
l
Static DNS Settings If you selected the Static Ethernet setting, enter the addresses required:
DNS Search Path – Enter the path needed to reach the Domain Name Server (DNS).
l
DNS Nameserver – Enter the IP addresses of up to three DNS nameservers.
l
Network Status:
Displays the current network connection status and values.
Tests:
In each case, start the test by entering the host's name or IP address and clicking the
Ping Host Ping the host.
Trace Route Trace the route to the host. This can take a few minutes to complete.
DNS Lookup See the host's details held on the DNS.
TCP Dump Collect IP packets for the number of seconds you specify.
9.2.4 TV & Radio
Use the TV & Radio options to enable the iCC to use TV and radio stations in playlists.
Click the tab for the option you require:
Digital Tuner Stations – Adding and editing digital TV and radio station names.
l
Streaming TV & Radio
l
– Specifying and checking multicast addresses.
iCOMPEL Content Commander User Guide
button and reboot the iCC:
button:
135