Editing A Zone's Properties - Black Box iCompel ICOMP-ICC User Manual

Change the zone order by dragging-and-dropping the
l
'Background' image to the back of the layout).
Close the Select Zone list by clicking its button again or clicking elsewhere on the page.

2.3.3 Editing a Zone's Properties

Click the
You can move the dialog around the screen by dragging it by its title bar. Close the dialog by clicking its
clicking the
You can access and configure the properties by selecting the appropriate tab and entering the values required:
Zone Choose from the following options:
Zone Name – Optional. Enter a descriptive name for the zone. The iCC shows this name when you are on a
l
zone-specific page (such as in its playlist).
Media – Check the relevant box or boxes to enable the zone to play that media type.
l
Size & Position Size and position the zone by entering specific values.
Note: If you use pixel values, the result may vary according to the resolution of the screen.
Top, Bottom, Left, and Right Edge Offsets – The iCC offsets the position of the zone relative to the edge of
l
the screen.
Width – Exact width for the zone.
l
Height – Exact height for the zone.
l
Aspect Ratio – Use to automatically size the zone depending on the aspect ratio of its content. Only
l
available if you use pixels for Width and Height and do not select the Specify custom width and height
option. First, select the type of aspect ratio needed from the drop-down list. Second, select whether the iCC
calculates the required zone size keyed to the height or to the width.
Properties Check the box or boxes to enable the options required:
Image – If you have enabled the zone to show images, check this box to see the first item in the playlist in the
l
layout editor (instead of the standard colored area). This helps preview the image and align other zones to it.
Design Visibility – Uncheck this box so that the zone is not shown in thumbnail views. This helps to edit
l
other zones that are overlapped by this zone.
Media Audit – Check this box to enable media audit reporting for the zone. You can override this on an item-
l
by-item basis in the playlist. See
button to open its dialog:
button again.
Reporting
iCOMPEL Content Commander User Guide
icon. This is the zone order in layers (for example, moving the
for more details on reporting.
button or by
37