Table of Contents
Advertisement
3.4.3 Image Properties
The following properties apply to zones enabled as an Image player:
Fade In
You can set the image to fade in with one of these options:
No Fade in – Image appears immediately without fading in.
l
Fade In n.n seconds – Image fades in from the background. Specify the number of seconds for the fade-in to
l
last (default is 1.5 seconds).
Cross fade from previous image – Image fades in as the previous image fades out. You must also set the
l
previous image's Fade Out option to Cross fade to next image. If no previous image is set to cross fade, this
image fades in from the background in the number of seconds you specify (default is 1.5 seconds).
Duration
Select the duration you require:
Show image indefinitely – The player shows the image always.
l
Show the image for – The player shows the image for the period you specify.
l
Fade Out
You can set the image to fade out with one of these options:
No Fade out – Image disappears immediately without fading out.
l
Fade out in n.n seconds – Image fades out to the background. Specify the number of seconds for the fade-
l
out to last (default is 1.5 seconds).
Cross fade to next image in n.n seconds – Image fades out as the next image fades in. You must also set
l
the next image's Fade In option to Cross fade from previous image. If no next image is set to cross fade,
this image fades out to the background in the number of seconds you specify (default is 1.5 seconds).
Mode
You can set the display mode to one of these options:
Fit to Zone – Stretches the image to fill the zone. This will distort the image if the zone does not have the
l
same aspect ratio as the image.
Letterbox – Shows the entire image and preserves its aspect ratio. The player displays the letterbox color in
l
any space in the zone not covered by the image.
Crop – Preserves the image aspect ratio but cuts off its edges if it is larger than the zone.
l
Letterbox Color
If you select Letterbox as the display mode, some space may be left in the zone outside of the image. Use this
option to select the color the player displays in that space.
Opacity
To allow background items to be visible, enter a percentage to match the opacity required. 100% is completely
opaque and 1% is almost completely transparent.
iCOMPEL Content Commander User Guide
67
Hide quick links:
Advertisement
Table of Contents
