Table of Contents
Advertisement
SBI-7125W-S6 Blade Module User's Manual
Table 6-6. PCI Configuration Submenu Menu Options
Menu Option
Onboard GLAN1/
Onboard GLAN2
(Gigabit- LAN)
OPROM Configure
Default Primary Video
Adapter
Emulated IRQ
Solution
PCI-E I/O
Performance
PCI Parity Error
Forwarding
ROM Scan Ordering
PCI Fast Delayed
Transaction
Reset Configuration
Data
Large Disk Access
Mode
Table 6-7. Advanced Chipset Control Submenu Menu Options
Menu Option
SERR Signal
Condition
4GB PCI Hole
Granularity
Memory Branch
Mode
Branch 0 Rank
Interleave
Branch 0 Rank
Sparing
Branch 1 Rank
Interleave
Branch 1 Rank
Sparing
Enhanced x8
Detection
Description
Enabling this option provides the capability to boot from an Ethernet port. The
options are Enabled and Disabled.
Choose the default video adapter. The options are Onboard and Other.
Choose the emulated IRQ solution. The options are Enabled and Disabled.
Choose between Payload 256B (with coalesce disabled) and Coalesce (with a
payload size of 128 bytes).
Enabling logs PCI SERR/PERR error events in BIOS and IPMI. The options are
Enabled and Disabled.
Determines what kind of option ROM activates first. The options are Onboard
First and Addon First.
Enabling improves heavy DMA transfer for 32-bit PCI multimedia cards. The
options are Enabled and Disabled.
If set to Yes, this setting clears the Extended System Configuration Data (ESCD)
area. The options are Yes and No.
This setting determines how large hard drives are to be accessed. The options
are DOS or Other (for Unix, Novelle NetWare and other operating systems).
Description
This setting specifies the ECC Error conditions that an SERR# is to be asserted.
The options are None, Single Bit, Multiple Bit and Both.
This feature allows you to select the granularity of PCI hole for PCI slots. If
MTRRs are not enough, this option may be used to reduce MTRR occupation.
The options are 256 MB, 512 MB, 1GB and 2GB.
This option allows the BIOS to enumerate Host Mode for Device 16, Function 1,
Reg. 40h bit 16 and Reg. 58h [14]. The options are Interleave, Sequential,
Mirror and Single Channel 0.
Selects the Branch 0 rank interleave. The options are 1:1, 2:1 and 4:1.
Enable to enable the sparing feature for Branch 0 Rank. The options are
Enabled and Disabled.
Selects the Branch 1 rank interleave. The options are 1:1, 2:1 and 4:1.
Enable to enable the sparing feature for Branch 1 Rank. The options are
Enabled and Disabled.
Select enabled to enable Enhanced x8 DRAM UC Error Detection. The options
are Enabled and Disabled.
6-8
Advertisement
Table of Contents
