Table of Contents
Advertisement
SBI-7125W-S6 Blade Module User's Manual
Using Auto Configuration
Selecting A
UTO
(Figure
5-7).
A
C
UTO
ONFIGURATION
configuration. When you select A
W
M
S
IZARD
ODE
configuration possible using the available physical disks.
Follow these steps to create a new storage configuration in A
1. Select a redundancy option from the drop-down menu at the bottom of the A
C
ONFIGURATION
•
No Redundancy: The new configuration will have no data redundancy (RAID
0). If a physical disk in the confi guration fails, all data will be lost.
•
With Redundancy: The new configuration will have data redundancy via mir-
rored data (RAID 1) or via parity data (RAID 5). If a physical disk fails, data is
still protected.
2. Select an initialization option from the drop-down menu at the bottom of the screen:
•
No Initialization: The new configuration is not initialized, and the existing data
on the disks is not overwritten.
•
Fast Initialization: MegaRAID Storage Manager software quickly writes zeroes
to the first and last 8 Mbyte regions of the new virtual disk.
Figure 5-7. Auto Configuration Screen
C
mode brings up the A
ONFIGURATION
is the quickest and simplest way to create a new storage
UTO
screen, the Configuration Wizard creates the best
ELECTION
screen:
UTO
C
mode on the C
ONFIGURATION
5-14
C
screen
ONFIGURATION
ONFIGURATION
C
UTO
ONFIGURATION
mode:
UTO
Advertisement
Table of Contents
