Security; Table 6-11. Hardware Monitor Submenu Menu Options; Table 6-12. Security Menu Options - Supermicro SBI-7125W-S6 User Manual

Blade module
Hide thumbs Also See for SBI-7125W-S6:
Table of Contents

Advertisement

SBI-7125W-S6 Blade Module User's Manual

Table 6-11. Hardware Monitor Submenu Menu Options

Menu Option
CPU Temperature
Threshold
Voltage Monitoring
6-6

Security

Choose Security from the Phoenix BIOS Setup Utility main menu with the arrow keys.
Security setting options are displayed by highlighting the setting using the arrow keys
and pressing <E
Menu Option
Supervisor Password
Is:
User Password Is:
Set Supervisor
Password
Set User Password
Password on Boot
Description
This option allows the user to set a CPU temperature threshold that will activate
the alarm system when the CPU temperature reaches this pre-set temperature
threshold. The options are 70
The hardware monitor provides the following temperature data:
• PECI Agent 1 Temperature
• PECI Agent 2 Temperature
• System Temperature
The following voltages are displayed:
• VcoreA
• VcoreB
• +1.8V
• P1V5
• +3.3V
• +12V
• 5Vsb
• 5VDD
• P_VTT
• Vbat
>. All Security BIOS settings are described in
NTER

Table 6-12. Security Menu Options

Description
This displays whether a supervisor password has been entered for the system.
Clear means such a password has not been used and Set means a supervisor
password has been entered for the system.
This displays whether a user password has been entered for the system. Clear
means such a password has not been used and Set means a user password has
been entered for the system.
When the item "Set Supervisor Password" is highlighted, hit the <Enter> key.
When prompted, type the Supervisor's password in the dialogue box to set or to
change supervisor's password, which allows access to the BIOS.
When the item "Set User Password" is highlighted, hit the <Enter> key. When
prompted, type the user's password in the dialogue box to set or to change the
user's password, which allows access to the system at boot-up.
This setting allows you to require a password to be entered when the system
boots up. The options are Enabled (password required) and Disabled (password
not required).
o
o
o
C, 75
C, 80
C and 85
6-12
o
C.
Table 6-12
below.

Advertisement

Table of Contents
loading

Table of Contents