Configuration Options; Ultra Riser Cards; Wio Riser Cards; Storage Protocols - Supermicro SuperServer 220U-TNR User Manual

Configuration Options

Ultra Riser Cards

Ultra Riser cards provide network connections and other capabilities. The customer must
choose one when purchasing the system.
LAN Ports Part Number
No NIC AOC-2UR668G4
Two 10GBaseT AOC-2UR68G4-i2XT
Four 10GBaseT
AOC-2UR68G4-i4XTS
(two SFP+)
Two 25GbE AOC-2UR68G4-m2TS

WIO Riser Cards

Several customer choices are available for other riser cards. See the
Riser Cards section in this chapter for details.

Storage Protocols

The storage drive bays can support SATA, SAS, and NVMe in any combination. To enable
SAS and NVMe, additional hardware is required. Once the supporting hardware is installed
for a selection of bays, drives of any storage protocol type can be inserted.
SATA – The default configuration supports up to twelve SATA drives. (Cables only)
SAS – An add-on controller card and cables can support up to twenty-four SAS (and SATA)
drives.
NVMe – System supports up to twenty-two NVMe drives. The motherboard supports up to
ten NVMe drives. Support for more than ten requires cables and retimer cards. Ten or fewer
NVMe drives require a cable kit only.

Power Supply Options

Watts
1600
2000
1300 DC
Ultra Riser Networking Options
Description
Two PCIe 4.0 x16 and PCIe 4.0x8 (in x16, internal)
Two RJ45, Intel X710-AT2, PCIe 4.0 x8 (in x16, Internal),
PCIe 4.0 x8 (in x16), PCIe 4.0 x16
Two RJ45 and two SFP+, Intel X710-TM4, PCIe 4.0 x8
(in x16, Internal), PCIe4.0 x8 (in x16), PCIe 4.0 x16
Two 25GbE, two SFP28, Mellanox ConnectX-6, PCIe 4.0 x8
(in x16, Internal), PCIe 4.0 x8 (in x16), PCIe 4.0 x16
Power Supply Module Options
Part Number
PWS-1K62A-1R (default)
PWS-2K08A-1R
PWS-1K30D-1R
10
Chapter 1: Introduction
Expansion Slots and
80Plus Level
Titanium
Titanium
Not applicable