Chapter 5 - Hardware Reset - Brickcom VD-E200Af series Hardware User Manual

Megapixel day & night vandal dome network camera

Hide thumbs Also See for VD-E200Af series:

Table of Contents

Chapter 5 - Hardware Reset

Reset Button

The Reset Button can be used to restore the camera to factory default settings. If the

camera experiences a problem, rebooting the camera may correct the problem. If the

problem remains, please restore the camera to factory default settings and set it up

again.

To Reset

Press and hold the Reset Button for more than 10 seconds using a paper clip or thin

object. Wait for the camera to reset to default.

NOTE - By resetting the camera, all settings will be restored to the factory default

settings.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the VD-E200Af series and is the answer not in the manual?

Vd-e200nf series