SiBE121135
1.4
Airflow Direction Control
Power-Airflow
The large flap sends a large volume of air downward to the floor. The flap provides an optimum
Dual Flaps
control in cooling, dry, and heating operation.
<Cooling / Dry>
During cooling or dry operation, the flap retracts into the indoor unit. Then, cool air can be blown
far and distributed all over the room.
<Heating>
During heating operation, the large flap directs airflow downward to spread the warm air to the
entire room.
Wide-Angle
The louvers, made of elastic synthetic resin, provide a wide range of airflow that guarantees
Louvers
comfortable air distribution.
Auto-Swing
The following table explains the auto-swing process for cooling, dry, heating, and fan:
Wall Mounted Type
Floor Standing Type: FVXG Series
The swinging range of the flap is the same in any operation mode.
Function and Control
Series
Cooling / Dry
10˚
FTXG
60˚
5˚
FTXS-K
CTXS-K
45˚
15˚
FTXS-J
50˚
10˚
FTXS-G
40˚ 10˚
40˚
(R2814)
(R14634)
Vertical Swing (up and down)
Heating
20˚
15˚
65˚
70˚
(R11662)
15˚
45˚
(R11256)
30˚
30˚
30˚
55˚
70˚
(R12182)
5˚
15˚
5˚
15˚
35˚
55˚
35˚
(R2815)
Indoor Unit Control (RA Models)
Fan
5˚
25˚
10˚
75˚
80˚
75˚
(R11664)
(R11663)
5˚
45˚
(R11257)
(R11256)
8˚
30˚
65˚
65˚
80˚
(R11402)
(R14208)
5˚
5˚
55˚
55˚
55˚
(R2813)
(R2816)
Horizontal
Swing (right
and left)
—
—
(R11404)
(R2817)
79