Renault R-LINK2 Driver's Handbook Manual page 49

NAVIGATION SETTINGS
"Speed warning"
Maps may contain information about
the speed limits of the road segments.
The navigation system is able to warn
you if you exceed the current limit. This
information may not be available for
your region, or may not be fully correct
for all roads on the map.
The following warning types are avail-
able:
– "Speed limit always visible": acti-
vate this function so that the speed
limit for the section of road taken is
always displayed on the navigation
screen.
– "Speed warning": the current speed
limit is displayed in red and flashes
on the map when you exceed it.
– "Overspeed warning sound": a beep
sounds when you exceed the speed
limit.
(2/5)
"Safety warnings"
This function enables you to get a beep
and/or visual warning when you ap-
proach sensitive areas such as near
schools, level crossings, hazardous
areas, etc.
You can programme the navigation
system so that it displays these in-
creased vigilance points on the map,
and so that you can be warned by a
beep when you approach these areas.
For some of these areas, there is a
legal or recommended speed limit. The
beep may differ depending on whether
you are driving under or over the speed
limit.
Choose to be warned when approach-
ing these increased vigilance areas or
only when you are exceeding the speed
limit.
In certain countries it is illegal to ac-
tivate the camera warning option
and this could lead to prosecution.
"Warning sign alerts"
Activate this function to be informed
when approaching specific sections of
road (obstacles, tight corners, cross-
ings, etc.) by road sign displays on
the map screen. For each category
of warning sign, set the warning type
(audio and/or visual) and the distance
from the hazard from which you want to
receive a warning.
Precautions regarding
navigation
Use of the navigation
system does not in any way
replace the responsibility or vigi-
lance of the driver while driving the
vehicle.
2.19