Renault R-LINK2 Driver's Handbook Manual page 39

ENTERING A DESTINATION
On map
Select
"On Map"
This function enables you to
define a destination from a point
you have selected on the map.
From the "Navigation" menu, select
"Destination" then "On the map".
Move around the map to position
the cursor on your destination,
then confirm by pressing "Select":
the system calculates the route.
(4/6)
Pop-up menu
Select a destination as described pre-
viously and then press 2 to access the
following functions:
– "Places around the cursor";
– "Add to address book";
– "Information".
"Places around the cursor"
This function enables you to find points
of interest around the selected position.
You can search, filter, sort and view all
the results found by the system on the
map.
2
"Add to address book"
This function allows you to save the se-
lected position in the address book.
"Information"
This function enables you to fund de-
tails (address, latitude and longitude)
on the selected position.
Confirming the destination
Once your destination information has
been entered, the system displays a
route summary for confirmation. Press
"Select" at the bottom of the screen to
confirm. The system will make the cal-
culation.
Note: The calculation criteria can be
modified in the route settings.
At the end of the calculation, the system
displays a navigation summary.
Note: If you do not touch the screen,
this page will close after ten seconds
and guidance will start automatically.
To confirm your destination and acti-
vate guidance, press button "Go".
2.9