Renault R-LINK2 Driver's Handbook Manual page 120

SYSTEM
(5/6)
« System
information »
This menu shows the various dif-
ferent pieces of information on the
system:
– Software release;
– boot version;
– HUID information;
– licence;
– Navigation information;
– current language;
– system update.
« Units »
(depending on the
vehicle)
This menu enables you to choose the
type of distance unit: km or miles.
7.6
« Volume »
This menu lets you adjust the follow-
ing settings by pressing "+" or "–":
– Main audio;
– TA/I-Traffic;
– Phone ringtone;
– telephone communications;
– Navigation;
– button sound;
– Obstacle detection;
– Lane departure warning;
– Voice command;
– Internet source;
– Warning sound.
To reset your selection, press the
pop-up menu button, then "Reset".
Note: "0" adjustment is mute.
Note: Settings vary depending on the
vehicle.
"General reset"
This menu lets you return all the
system factory settings. All the data
and configuration will be deleted.
When a confirmation message is dis-
played on screen, press "Yes" to con-
firm.
Note: After a reset, the system re-
starts in the factory set language. To
change the language, see the rele-
vant paragraph in this section.
Note: Depending on the vehicle,
press the pop-up menu button to
access "General reset".
« License »
(depending on the
vehicle)
This menu lets you read all the li-
cence conditions of the licence cur-
rently installed on the multimedia
system.