Disassembly And Reassembly; Cautions For Disassembly And Reassembly; Cautions For Ink Stains; Damage By Static Electricity - Canon W2200 Service Manual

Part 2 : Troubleshooting

3. DISASSEMBLY AND REASSEMBLY

3.1

Cautions for Disassembly and Reassembly

3.1.1

Cautions for ink stains

When replacing the waste ink absorber located at the bottom case of the printer, do not place
the upper printer unit directly on the desk or the floor. There is a possibility that ink comes
out of the purge unit, resulting in the ink stain on the desk or the floor. Be sure to place a
sheet on the desk or the floor before work. Also, some parts inside the printer may be
stained by ink mist. (Around platen, purge unit and paper delivery cover)
3.1.2

Damage by static electricity

Dry air or rubbing of clothing may cause a build up of static electricity on the human body.
Static electricity may destroy electrical components or alter the electrical characteristics of
components. Take extra care when handling the control board.
3.1.3

Deformation of spur tips

Be careful not to deform the spur tips. As for service parts, the spur unit is supplied with a
metal support attached. When replacing the parts, don't forget to remove the metal support.
3.1.4

Ink drain

Ink must be drained before disassembling or transporting the printer.
Make the printer offline and press the setup key. From the utility menu, select "Move
Printer" and perform ink drain according to the LCD display. Also, remove ink tanks.
2-16
W2200