Canon W2200 Service Manual page 21

W2200
Menu Menu Menu Menu
Interface settings
Maintenance settings
Utility menu
Key to enter menu / LCD display Key to enter menu / LCD display Key to enter menu / LCD display Key to enter menu / LCD display
Select Interface
Set Centronics
ECP / Nibble / None
Ext. Network
Initial Settings *1
Set TCP/IP
Cleaning at ON
Initialize Panel *2
Utility key
Nozzle Check
Status Print
Ext. I/F Print
LF Status Print
Head Cleaning A
Head Cleaning B
Head Cleaning C
Move Printer
Replace Head
Key to move within Key to move within Key to move within Key to move within
menu / function menu / function menu / function menu / function
Sets to select the
interface, IEEE1284 or
USB.
Designates the mode of
IEEE1284.
Restores the network
card settings to the
factory shipment
values.
Sets the TCP/IP setting
of the network card.
Sets whether or not to
perform purging at
powering on.
Restores the setup
menu set values except
for the extension
network setting to the
factory shipment
values.
key
Prints nozzle check
pattern.
Prints printer setting
status.
Prints NIC board
status.
Prints the set value of
the paper feeding
amount.
Performs cleaning
operation.
Performs cleaning with
ink consumption
amount higher than
Cleaning A.
Fills ink in the print
head and tubes on
arrival. (Ink
consumption amount is
higher than Cleaning
B.)
Drains internal ink into
the waste ink absorber
when the printer is
transported.
Performs head
replacement.
2-3
Part 2 : Troubleshooting
Execution Execution Execution Execution
key key key key
key
key
key
key
key
key
key
key
key
key
key
key
key
key
key
key