Canon W2200 Service Manual page 39

W2200
3.4 Adjustments and Settings After Disassembly and Reassembly
3.4.1 Adjustments and setting list
Positions for necessary adjustment or resetting have been described below after a service
personnel disassembles or reassembles the printer parts.
Replacement parts Replacement parts
Replacement parts Replacement parts
Print head
Control board
NIC board
Waste ink absorber
Carriage unit
3.4.2 Print Adjustment
i) Print head adjustment i) Print head adjustment
i) Print head adjustment i) Print head adjustment
1) When the printer is ON, make it offline and press the set up key.
2) When "Ext. Features" is displayed, press
display "Adjust Printhead".
3) When "Adjust Printhead / Print Pattern !" is displayed, press
4) Print adjustment pattern.
5) After printing is completed, press
appears on the display.
6) When the above appears, if
From the printed adjustment pattern, select the optimal value and press
execute.
7) As for other settings B, C and D, return to 5) and press
key to execute. Press
8) Next, adjust the band process which is used during one pass printing.
9) Display "Band Adjust / Print Pattern" and press
10) After band adjustment pattern printing is completed, display "Band Adjust / Adj. Setting G
!" and press
11) From the printed adjustment pattern, set the optimal value by pressing
key to execute.
ii) LF adjustment ii) LF adjustment ii) LF adjustment ii) LF adjustment
1) When the printer is ON, make it offline and press the set up key.
2) When "Ext. Features" is displayed, press
display "LF Adjust".
3) When "LF Adjust / Print Pattern !" is displayed, press
4) Print adjustment pattern.
Adjustment / settings Adjustment / settings
Adjustment / settings Adjustment / settings
Print adjustment
EEPROM initialization
Waste ink absorber counter clear
Destination setting
IP address settings
EEPROM waste ink counter clear (Control board) Service mode
Print adjustment
key until "Adjust Printhead / Adj. Setting A !"
key is pressed, the current adjustment value is displayed.
key to select the optimal value and
key. The current adjustment value will be displayed.
2-21
key to select "Adjust Printer", and then
key.
key to select the setting and
key.
key to select "Adjust Printer", and then
key.
Part 2 : Troubleshooting
Mode Mode
Mode Mode
User mode
Service mode
User mode
User mode
key to
key to execute.
key, and press