Table of Contents
Advertisement
6. Rotate antenna to illuminate the last flickering
LED light.
7. Repeat Steps 5 and 6 to pinpoint signal
reception.
NOTE: Refer to television manufacturer's
instructions to scan for available
channels.
Further Information
See the antenna manufacturer's user guide
provided in your InfoCase for complete operating
and maintenance information.
TV SIGNAL AMPLIFIER
The TV Signal Amplifier is built into the
antenna and can be turned on or off with a power
switch.
An indicator light will illuminate when the
switch is on and the signal amplifier is active.
TV Signal Amplifier Power Switch
(Located in an overhead cabinet or mounted
on a wall near the TV)
-Typical View
AUDIO/VIDEO SYSTEM
CONNECTION
–If Equipped *Model 70C
An HDMI Connection is provided in the
cabinet near the TV for connection of your choice
of DVD player, home theater system, or satellite
receiver.
The cable is connected to the lounge TV.
CABLE TV CONNECTION
located in the water service center.
• Power
Switch
ENTERTAINMENT
HDMI Connection
(Located in cabinet near TV)
-Typical View
The cable television input connection is
Cable TV Input Connection
(Located in Water Service Center)
SECTION 8 –
8-5
Advertisement
Table of Contents
