Tv Signal Amplifier - Winnebago Adventurer 27N Manual

Table of Contents

SECTION 8 -

ENTERTAINMENT

3. Rotate the Attenuator Dial fully

CLOCKWISE.

4. Press Release Button on the Rotational Knob

and rotate antenna (until maximum number of

LED lights illuminate on the Signal Meter).

NOTE: LED lights will illuminate from left to

right. All LED lights may not illuminate,

depending on signal strength.

5. Rotate Attenuator Dial COUNTER-

CLOCKWISE until the last illuminated LED

light flickers.

6. Rotate antenna to illuminate the last flickering

LED light.

7. Repeat Steps 5 and 6 to pinpoint signal

reception.

NOTE: Refer to television manufacturer's

instructions to scan for available

channels.

Further Information

See the antenna manufacturer's user guide

provided in your InfoCase for complete operating

and maintenance information.

TV ANTENNA – DIGITAL

(Omnidirectional Digital HDTV Over-the-

Air Antenna)

–If Equipped

Your motorhome is featured with a

omnidirectional digital antenna, which provides

crystal clear digital HD reception of over-the-air

channels in addition to superior broad reception

range.

The digital antenna is equipped with a built-in

amplifier for maximum VHF and UHF

programming.

A built-in signal amplifier designed to

strengthen signals, is controlled by a power

switch built into the optional video selector panel

or on a wall plate assembly.

8-4

WARNING

Never allow the antenna to touch

electrical power lines or any other

electrical wires.

Operating the Digital Antenna

•

Turn the Digital Antenna Power Switch ON.

Digital Antenna Power Switch

(Located in an overhead cabinet or