Canon PIXMA Pro9500 series Quick Start Manual page 11

Basic Printing
~
Note •
The following paper can be used in the Auto Sheet Feeder.
Paper Size
Standard paper: From 4" x 6 11
/
101.6 x 152.4 mm to A3+ (13 11 x 19 11
)
size (329.0 x 483.0 mm / 13 x 19 inches)
Non-standard paper: From 89.0 x 120.0 mm /3.50 x 4.72 inches to
329.0 x 584.2 mm / 12.95 x 23 inches
Weight
From 64 gsm / 17 lb to 105 gsm / 28 lb (plain paper except for
supported Canon genuine media)
*You can use art paper that is not produced by Canon that is up to 200
gsm / 53 lb.
Do not use heavier or lighter paper (except for supported Canon
genuine media), as it could jam in the printer.
See "Non-Canon Genuine Specialty Paper" of the User's Guide on-
screen manual.
• When printing on plain paper (64 gsm / 17 lb), load up to 150 sheets in
the Auto Sheet Feeder.
However, the paper may not feed correctly depending on the type of
paper and the environment (high temperature / high humidity / low
temperature / low humidity). If this happens, reduce the number of
sheets of paper by about half (approximately 5 mm / 0.2 inches).
• When printing on art paper that is not produced by Canon that is up to
200 gsm / 53 lb, load one sheet at a time.
• When printing on plain paper, do not stack more than 50 sheets in the
Front Tray.
• Do not touch the printed surfaces until the ink dries. For specific drying
times, refer to the instructions packaged with your media.
7
Basic Printing
~
Note •
The following paper can be used in the Auto Sheet Feeder.
Paper Size
Standard paper: From 4" x 6 11
/
101.6 x 152.4 mm to A3+ (13 11 x 19 11
)
size (329.0 x 483.0 mm / 13 x 19 inches)
Non-standard paper: From 89.0 x 120.0 mm /3.50 x 4.72 inches to
329.0 x 584.2 mm / 12.95 x 23 inches
Weight
From 64 gsm / 17 lb to 105 gsm / 28 lb (plain paper except for
supported Canon genuine media)
*You can use art paper that is not produced by Canon that is up to 200
gsm / 53 lb.
Do not use heavier or lighter paper (except for supported Canon
genuine media), as it could jam in the printer.
See "Non-Canon Genuine Specialty Paper" of the User's Guide on-
screen manual.
• When printing on plain paper (64 gsm / 17 lb), load up to 150 sheets in
the Auto Sheet Feeder.
However, the paper may not feed correctly depending on the type of
paper and the environment (high temperature / high humidity / low
temperature / low humidity). If this happens, reduce the number of
sheets of paper by about half (approximately 5 mm / 0.2 inches).
• When printing on art paper that is not produced by Canon that is up to
200 gsm / 53 lb, load one sheet at a time.
• When printing on plain paper, do not stack more than 50 sheets in the
Front Tray.
• Do not touch the printed surfaces until the ink dries. For specific drying
times, refer to the instructions packaged with your media.
7