Scan Settings; Image Quality; Density - Canon FAX-L160 Reference Manual

Scan Settings

Before pressing [Start] to begin copying, you can adjust the settings
to better suit the document to be scanned. These settings return to
the default values if the machine remains idle for one minute or if
you press [Stop/Reset].
■

Image Quality

The default setting is <TEXT/PHOTO>.
1.
Press [COPY].
2.
Press [Image Quality] repeatedly to select the
document type.
<TEXT>: for text documents
<PHOTO>: for documents that contain fine text or photos
<TEXT/PHOTO>: for documents that contain text and photos
– When you press [Stop/Reset], the setting will be canceled.
If you want to keep the settings, set the image quality as following:
[Menu] → <COPY SETTINGS> → <STANDARD SETTINGS> →
<IMAGE QUALITY> → Press [
document type.
– Copy density automatically changes to the manual mode when
<TEXT/PHOTO> or <PHOTO> is set.
] or [ ] to select the desired
■

Density

You can adjust the density to the most appropriate level for the
document either automatically or manually.
The default setting is <MANUAL> (5).
Adjusting Automatically
1.
Press [COPY].
2.
Press [Density] repeatedly to select <AUTO>, then
press [OK].
The image quality is automatically set to <TEXT>.
4-3