Canon FAX-L160 Reference Manual page 49

5.
Enter the recipient name (max. 20 characters,
including spaces) with the numeric keys, then
press [OK].
Ex.
N A M E
C a n
If you do not want to register the recipient name, press [OK] again to proceed
to the next.
6.
Enter the fax/telephone number you register
(max. 50 digits, including spaces and pauses) with
the numeric keys, then press [OK].
Ex.
T E L N U M B E R E N T R Y
0 1 2 X X X X X X X _
– Press [R] first if the machine is behind a switchboard. ("Dialing Through a
Switchboard, " on p. 3-17.)
– Press [Redial/Pause] to enter a pause. (See "Dialing an Overseas Number
(With Pauses), " on p. 3-20.)
[ A ]
7.
Press [ ] or [ ] to select <ON>, then press
[OK].
If no subaddress or password is required, press [
select <OFF>, then press [OK]. And press [Stop/Reset] to return to
the standby mode.
8.
Enter the subaddress number you want to use
(max. 20 digits) with the numeric keys, then press
[OK].
If you want to attach a subaddress to your send job, make sure that the
recipient's fax machine supports ITU-T standard subaddresses.
Ex.
S U B A D D R E S = 1 2 3 4 _
9.
Enter the password you want to use (max. 20
digits) with the numeric keys, then press [OK].
Ex.
P A S S W O R D = 5 6 7 8 _
10.
Press [Stop/Reset] to return to the standby mode.
] or [ ] to
3-7